Uncategorized

Seasonal Packaging Supplies and Adoption for Various Conditions 

Antoine FerraraLeave a comment

Holiday and seasonal packaging is a special thing. Some come with weather problems, and even the dampness of snow and winter.   Some as well, need to be marketed for the holidays. In some cases, there might be market peaks too, especially during the holiday season. 

Whether it’s the summer heat and humidity, winter temps chilling your packaging, or a holiday surplus that has you pulling your hair out, one thing is certain—seasonal packaging does NOT work all year round, and a one size fits all approach will not only ruin your packaging, but may also ruin your credibility. 

The Solutions for Holiday Packaging 

With holiday packaging, you need to be mindful of different solutions to make them stand out.

For summertime, heat-resistant tapes are a great solution, because they won’t come undone when the temperatures get hot, and the humidity gets so high it becomes sticky.

In the winter, anti-condensation wraps are used to protect the item from sweating and then ruining the packaging. Insulated boxes may also be used when the temperatures get particularly cold as well. 

Finally, festive fillers. While most of the focus is on the temperature regulations for boxes, you can also look at the fun that festivity of these wraps give. Little fillers, inserts, and the like are functional. Adding some fun to the function will make seasonal packaging stand out.

Various Inserts for Holiday themed Packaging 

Now, with holiday-themed packaging, you need to also factor in the types of supplies.

Holiday-themed labels are one example. These labels are going to have the holiday themes on there, which makes it fun for customers and indicates that it’s a special holiday package.

You can also pre-print gift wrap mailers, so you just put the item into the holiday themed mailer, then send it out. It works great, and is a huge convenience to you as a seller, because you aren’t sitting here making a whole new box, but instead using what you have. For buyers it’s particularly good, because they get the idea it’s a holiday package, without having to pay extra. 

Planning Inventory 

A big part of seasonal packaging is the planning that goes along with this. When planning seasonal and holiday packaging, always make sure you factor in for the surges. The last thing you need is you scrambling at the last minute, praying that you can get enough boxes in time. 

Avoid delays and waste in your packaging by ordering appropriately. So, factor in for the usual holiday rush. Have this in place weeks ahead of time, and then, once the holiday season starts, they’ll be there and ready.   If you start to see early on you’ll need more, then order.

Overall, the best practices are to be fast, efficient, and to the point with all of your packaging. Make sure that, if you start to see temperature changes, plan accordingly. Add some fun holiday flair to the items inside, in order to make this something special and truly shine.

Your holiday inventory needs to be properly planned. Seasonal packaging is great because a lot of customers and clientele will love it. it is special, and will tell them that the limited edition is important, and will truly make this something memorable for everyone that’s involved. 

If you’re a brand who has not started to plan their holiday packaging, then it’s up to you to take initiative. Talk to someone and ask them about the holiday packaging incentives you wish to have, along with some factors that come along with this, and see for yourself the results. 

Plastic or Paper Packaging

Antoine FerraraLeave a comment

The festive season and early January have the greatest shipment volumes of the year. Packaging is in great demand as holiday presents travel across the country, and businesses strive to send final orders out in time for the new year. What should you consider while packaging your products and gifts this holiday season: plastic or paper?

Based on your requirements, one or both may be appropriate. However, recognizing and comprehending the advantages of each may provide you with the ideal answer.

The Advantages of Plastic

One of the most compelling reasons to use plastic packaging is its durability. Plastic packaging’s greatest value is self-evident during the cold months. With slush, snow, ice, and everything wintertime throws to us, plastic wrapping protects the contents from the elements. Plastic packaging offers a greater shelf life and keeps goods confined and unpolluted for a longer time.

Plastic wrapping also provides greater flexibility. Plastic permits for simpler formation for your requirement – from the smallest to the largest object.

Another significant advantage of plastic wrapping is its low cost. Plastic is a low-cost material that may help you save money. Plastic, especially in quantity, may be an excellent alternative for any budget.

The printing capabilities of plastic packaging provide vivid, bold colors and patterns, such as personalized poly bags, which make your business noticeable, whether you’re delivering a gift in person or sending it away.

Although paper is seen as a superior sustainable alternative due to its capacity to decompose naturally, plastic is also reusable and recyclable. Due to its durability, plastic may be used repeatedly, enabling secondary usage or possible re-shipping after the first shipment.

The Advantages of Paper

Adopting an Eco-friendly approach to packaging points to paper solutions. If discarded and not recycled, biodegradable paper wrapping is safer for the environment. It may also be reused effectively.

Paper packing is also becoming more standardized, allowing for sectioned weights and sizes that simplify calculating transportation costs. Paper packaging, depending on the weight of your item, has the capacity and durability to keep it in place.

The extra space between your product and the packaging edges allows for additional safety and protection. Corrugated packing provides a robust container to ensure that products are not bruised or bumped while on transit.

Although paper is somewhat costlier than plastic, its quality is evident. Paper packages and shipping materials make a statement, frequently implying a perceived higher value, that can help your business stand out.

Which should I go with?

The following three questions can assist guide you to the best option when choosing between plastic and paper packaging.

1. What type of statement do I want to make?

Sustainable products and packaging can direct people’s attention to paper. Paper wrapping may also convey a more premium or high-end tone than plastic packaging.

2. What level of protection does my product require?

If you’re concerned that your goods won’t resist the elements, plastic packing can provide better protection.

3. What is my financial situation?

Plastic packaging might be a more cost-effective option if you’re trying to save money.

Choosing A Contract Packaging Company That Can Meet Your Needs During A Move

Antoine FerraraLeave a comment

As your packaging requirements grow, you may start thinking about hiring a contract packaging company. That is because you do not want to be in a position where you are unable to get your products out on time. Hiring a contract packaging company that doesn’t pay attention to everything your business needs can lead you to this situation.

A contract packaging company has to acquire new warehouses or move to other locations as their business volume grows. So, you have to make sure that the co-packer you have hired can meet your packaging requirements even if they are moving their business to a new location.

It means that every contract packaging company must have some set protocols to meet the packaging demands of their clients regardless of their move.

In this article, we will explore the questions you need to ask your contract packaging company.

Why is it important to choose a co-packer who can meet packaging demands during a move?

While hiring a contract packaging company, you have to consider several factors, including the physical location of the company, costs, and labor force. However, none of these will matter much if the packaging unit has to shut down during a move. You will have to hire a company that can meet demands even if they have to move. Great services will strive to maintain a balance between moving operations and meeting your packaging requirements during all stages of relocation.

What questions should you ask your contract packaging company?

  • Will be able to able to meet our packaging requirements during the move? If their answer is ‘no’ or vague, you better look for another co-packer.
  • What protocols do you have in place to ensure the proper fulfillment of our packaging demands during the move? By asking this question, you basically want to know about their level of preparedness for the situation. Implementation of these protocols can help them make sure that their machinery, materials, and labor remain operational.
  • Shall there be any changes to expect during downtimes, lead times, or fulfillment dates? If the answer is yes, ask them about the expected delay. This way, you will be able to anticipate any situation and make necessary arrangements.
  • What is your backup plan to make sure that our supply chain remains intact and functional in case of any unforeseen circumstances? It’s a question you have to ask to know what their plan B is.
  • What will you need from us to ensure a scheduled production? Sure, you still have a responsibility to fulfill even if your contract packaging company is taking care of your product packaging. This question will help you make sure that your vendor is honest and open about everything you need to do before their move.
  • When will you move, and when is the date of the move’s completion? You have to know when the move is happening. It will help you understand what your co-packer is doing at the time of the move.

By finding answers to these questions, you will be able to make sure that your supply chain remains intact even if your contract packaging company decides to relocate.

What to do to Create Customized Packing Layout

Antoine FerraraLeave a comment

Entrepreneurs invest a considerable effort in designing as well as conceptualizing goods; packing is always a throwaway. Because the package functions as a spokesman for company merchandise, it is indeed critical to incorporate packing issues into the design process.

These are five things to think about while creating packing for a fresh commodity:

  1. Choosing The Packing Approach

Packing, in addition to being visually beautiful, serves as a kind of advertisement for any freshly designed items. Both expense and resources used in the packing could have an impact on critical elements of the organization. 

It all from the client encounter to the company bottom connection is taken into account. Emphasizing the packing concerns would contribute significantly to the result of the participation of any unique goods. As a result, establishing a package approach would assist to steer the item package conceptual layout.

  1. Choosing the Correct Package

Any packing company pick may have an impact on the appearance, texture, as well as performance of any merchandise. Vary based on the kind of business users are building, individuals might well be constrained in certain ways or who have complete freedom. 

An additional factor to examine for the package seems to be the substance. The merchandise might have to be packaged in many packing levels, such as the outside layering, interior overlay, plus individual packages. So every level must be designed and assembled in order and provide a uniform consumer encounter.

  • Its Surface Coat

Well, that’s what maintains company items secure, although time chance to think about it anyway! Its exterior covering protects the item while it is sent to its location or as it is packed in a container in-store. Preferably, individuals want components that can withstand harsh requirements while staying faithful to one’s advertising.

  • Its Interior Coat

Those would be the additional pieces that go surrounding the exterior package to protect the goods. It’s generally anything that protects the goods from wandering along too excessively. Maybe it is a coating to keep things fresher in meal packing. It depends greatly on the goods, however, the concept would be because it adds an additional level of protection to preserve the merchandise undamaged.

  • Commodity Containers

Visual merchandising is defined as the physical packaging in which the merchandise is contained or even whatever those previous levels are guarding against. This might be a container, wrapping, container, and everything else that protects the substance within safe. Users may study further regarding packing levels and want to have a deeper knowledge of the entire procedure.

  1. Investigating Constructive Designing

Whereas the aesthetics of business packages are vital, utility is also a crucial aspect of any layout concept. Take into account what to do to start creating eye-catching as well as workable wrapping without jeopardizing the shopping encounter. The physical architecture of packing guarantees that this is simultaneously secure as well as a consumer with business consumers. 

The expenses of the commodity as well as its packing must be addressed while producing, transporting, or marketing it. Because business goods must be lucrative, using packing-which is no expense can reduce company profitability.

  1. Create Artistic Theme

Combine construction methods and imaginative artistry employing visual elements to make an important impact on their targeted consumers. You may express a Business Company’s narrative with magnificent imagery which wants the money, purpose, or narrative via the creative procedure. It generates a good mood and helps people connect with the company’s concept. 

A correct package artistic layout, first through images towards the language, would assist convey crucial knowledge regarding the products as well as the company to business clients. Readily distinguishable among business rivals can drive the potential client core to pick unique items, be it regulation data or use features of the business to help the clients in one’s purchasing choice. 

Professionally produced package graphics may enhance a company’s unpacking pleasure. Personalization benefits, not just company branding as well as goods, but also potential consumers.

  1. Explore through collecting and building.

It requires thought plus dedication to create & manufacture the proper package for business goods. Effective visual merchandising may be an incremental method, thus evaluating the components, construction, and graphics before manufacturing components is strongly recommended. 

When putting any goods through into public, methods are typically and prototypes are critical stages in assessing the efficacy of the package concept. Verifying the company’s size as well as fitting inside the package is equally vital. Inspect it with specimens or models to ensure that the merchandise easily goes & pleasantly in the packaging. It would improve the client engagement or the legitimacy & competence of the business.

Variables that can influence the Price of Exporting Predominant Packages

Antoine FerraraLeave a comment

While seeking an overall price for exporting the main package, the business must supply their selected fundamental packaged food supplier with such a collection of data to enable a company to offer a business the cost they desire. As a result, it is critically important they comprehend the products they would require from business as well as the factors which may impact the pricing of various pieces. 

In this section, we would look at even the most critical factors that influence the purchase price of an external initial package job.

  1. About Package’s Friction coefficient

 What is the significance of this? Broadly stated, if your material becomes slippery, it might impede the basic packing procedure. Commodities would stream across multiple substrates as they pass via basic machines. If the substance is clean but not sticky, it really should travel out through the procedure quite easily. 

If the material is adhesive, it might physically clog the machine. It can result in reduced output, unwelcome breaks, as well as other uncontrollable difficulties. The lower the stickiness of an offering, the greater. Let us just find similar imaginary merchandise: sugary peas and candies. Also in hotter, moist climates, the coating of gummy worms will stay non-sticky. Flavors, on either hand, are much more prone to dissolve and get slippery, possibly leading to the aforementioned undesirable conditions. Because of these criteria, gelatin lentils would be a superior commodity having quicker manufacturing, almost no delay, as well as reduced full expenses.

  1. Overall Design of The Merchandise

Because of the same factors outlined previously, the form of the products would influence the price of the principal packing venture. Assume the commodity, including a baseball, has a pretty constant texture. A commodity with some of this form would go more easily via the basic packing process, resulting in a cheaper price. But supposing the business does indeed have a bunch of sharp boundaries or short spiky features. 

In that situation, they may still not move too via your technology but might clog the working if trapped on parts of the packing line’s gear. The cheaper the main packing number is expected to reach, the smoother the material moves via machinery with fewer touch points along the route.

  1. Considering Dimensions of The Merchandise

The dimension of the merchandise comes afterward. Though not as serious as the preceding points, the quantity of the goods would impact the price of the principal package endeavor. Assume the outcome is either too little or too huge. Within this situation, comparable issues to all of those outlined previously may arise, resulting in a much more sophisticated, longer-running operation with such a larger price tag.

  1. Your Package’s Composition

Generally said, the higher larger the end product, the further expensive it becomes to package. Let us just proceed to little gummy worms for yet additional fictional scenario. Assume users have 2 autonomous gelatin beans thing that determines initiatives. The initial assignment is to package slightly heavier packages of gummy worms. This phase is to package serving packages of gummy worms. The 1 tablespoon candy beans principle underlying operation would be substantially less costly than that of the weight venture. Users would be packing around 149 – 170 bottles each second with both the 1 tablespoon application. In comparison, the slightly heavier containers would barely allow workers to package approximately 20 bags every hour. This same 1-ounce undertaking would then complete much more quickly than that of the seven pounds ventures. As just a result, a one tablespoon venture will become the less expensive of something like the three trials.

  1. The Merchandise’s Ultimate Container Number

The more the maestro container number, the lower the overall expense. Now let’s return to the hypothetical potato chip world to demonstrate that statistic. The first principal packing task necessitates the use of ten containers for each carton of merchandise. That works out to ten packages each hour. The single crucial packing task necessitates 50-100 wrappers for each package of merchandise. 

That’s also equivalent to the preceding. Ten sachets in each container equal ten cartons every second. Each second, a hundred sacks equal one container. Making one container every hour is cheaper & convenient than making ten containers every hour; as a result, the one container every moment endeavor would be less expensive.

  1. Estimated Duration of Their Project’s lifecycle

That was the greatest important factor influencing the entire cost of any excipient job. So cheaper the overall market prices of the business cycle will also be the lengthier the stretch to operate their items as well as the greater the quantity. Many founders would not take something less than 2 sessions. If indeed the founder accepts it, customers may anticipate spending more money.

Are their good places to get gift boxes?

Antoine FerraraLeave a comment

The economy is changing and it is making a huge impact in every aspect of life in the United States.  The new rules in a different location have moved our economy to an online-focused world.  That can be very dangerous.    It has led me down many different roads of looking for new products and ways to stay ahead of this ever-changing economy.  I want to go over a few different things that I ended up doing this year.  My work changed how we did our marketing and I ended up moving.  This led me down a whole new world which all led to packaging supply stores.  It was really rather strange but I feel like I landed on a gold mine of information and it is a whole style of company that was created to help businesses and people who need boxes. It sounds strange but I have been needing to purchase cardboard boxes in so many different aspects and it all led me to the same place.  It is important to save money and be wise in where you shop.  

My life ended up needing to find good places to shop.  This meant that I was needing to source lots of different materials.  The moving and also my companies shipping department ended up needing lots of supplies.  I was in need of tons of different boxes and for different tasks. Originally, I used Amazon or a local big box store to purchase all of the boxes and supplies needed to run these endeavors.  The issue was that since we were going to ramp up shipping and moving that costs were simply going to go much higher.  

I needed a good product for our needs.   In my company’s work, I decided that Amazon was convenient but offered no bulk discounts for all the different boxes we needed.  We were also getting into corporate gifting and we needed more customization.  Etsy offered many good ideas but they were so expensive that it boggled the mind in the big picture.  This led me to find custom candy boxes at a online retailer and that was a huge hit.  We were able to customize candy boxes which was amazing, and get them shipped just like we were a big candy corporation. It was amazing because the prices were so low and only got lower the more you purchased.  This small task led me to take all our boxes from work and also from my own personal moving and try to shop here for them. It was a great hit for us!

Now I know where to go to save a lot of money and time.  It turns out that this type of store can cut costs because they manufacture them and ship directly.  It skipped all the middlemen and allowed us to lower prices by a vast amount. I was able to negotiate on bulk purchasing with this company and they were able to leed me to purchase the correct products which lowered prices even more.  It was nice to talk to a customer service agent and not a sales agent who had dealt with this.  It was like having a marketing company working for you for free and you cannot beat that kind of free service.  Don’t hesitate to shop the right location and save some money. 

Ecommerce and Sweet Treats are Here

Antoine FerraraLeave a comment

With all the changes in the United States economy there is a lot of opportunities.  Tons of companies are failing left and right and most of those are based on brick and mortar models.  It really hurts to see because they are closing due to the government selling lies to the people.  Starting a new company in the United States is not an easy task.  The simple fact that any individual cannot simply go out and start selling a product or service is honestly a bit sad.  You must go through lots of hoops and spend lots of money to make a company, register it and then fill out tons of paperwork to simply pay tax money to the government.  It is the beginning step of attempting to start a company. After the end of the 2020 Covid-19 Pandemic, you must also think about the fact that your company can be shut down for no reason if you are not considered an essential business.  This is reminding many people of socialism or communist countries and you would indeed be correct.  So if you want to break into the candy market you must think beyond the normal marketing and sales issues in order to sell your amazing treats to the world. So think about creating a company that is somehow essential and online in 2021. 

Now with a year of stupidity behind us, we must learn to thrive in the new 2021 economy.  So how do you create an essential business? The best idea is to follow the lists that have already been created in the state you are in.  Some states banned a large majority of companies and didn’t allow them to be in working order.  Don’t let your company get shutdown, you must be valuable in teh eyes of the government and the eyes of your target market.  So go and find those lists and attempt to fit your candy manufacturing or sales company into one of those niches that were allowed to stay open. Some states made food producers an essential business, but make sure that candy falls under that title or if you must sell an extra product along with your candy boxes in order to fit that list and stay open even if bad things happen and communism strikes again.  

The best way to beat the government is simply to be more technical to them.  It is pretty simple to incorporate under the broad terms that make you essential across teh nation.  Then you can end up producing candy boxes like the best of them and never be shutdown.  Now I would suggest making sure that when you incorporate that you put those essential terms into the reason the company exists. So if it’s food that must be produced to be called an essential business.

Then when you are incorporating your company, put that purpose of food producer into the incorporation documents of your company.  This can get down to proof that the state you are incorporated in then shows you were created to be essential!  I am not giving legal advice at all just stating some things that I think would be a wise move in order to start up a candy company. Consult a local lawyer before you start up and get the correct incorporation and advice to a startup because it is better to be right in the eyes of the law even if they are wrong to do it.

Scent-Infused Packaging Fillers to Improve the Unboxing Aroma 

Antoine FerraraLeave a comment

Did you know that you can add something extra to make your scented packaging really stand out? While some have used scented parts of the box and infused it in the outer packaging, some companies are making it so that the insides smell good too. packaging peanuts that are scented for example, are becoming popular. Some have even made it so that the filler you use, when shredded, also smells good.   Finally, some have also taken the item, wrapped it in paper, and then added a branded, infused scent that really stands out, and smells good too. 

Applications of this 

A lot of luxury items are taking advantage of this type of packaging because well, people like high-end items that smell good. Another one is spa goods. If you can make the items smell goo and enhance beauty care, it’s a one-two punch of benefits! Finally, artisanal products that need that extra bit of a scent.   You’ll want to add the scents in there to enhance the experience, and make it good too for you. 

The Scented Strategy 

With scent-infused packaging, there’s a specific strategy that tons of brands are using. They take a product, and then determine what fragrance works with this. For example, with a luxury soap brand, they may try to make the packaging smell like the item inside, wrapped up.    If you are selling jewelry, considering an earthy scent for sustainable jewelry brands is another good one. Finally, some may use a fun cinnamon flavor for artisanal goods, especially if the scent and spice rally stands out with the item. 

Again, all of the work together, and the biggest thing to do is to look at your items, choosing the right fragrance based on the type of product that you have. 

The Technical considerations 

While scent-infused packaging works wonders, there are a few considerations to have with this. 

The first is allergies. Though your customers might like it, if there’s an allergy there, it’s going to be a problem. you want something that’s non-allergenic. 

You also want something that’s safe for the environment, especially if you’re doing infusions. While c storms might be chomping at the bit for these products, if the infusions aren’t safe, it’s going to end up being a problem. 

Finally, packaging compliance. Make sure your packaging fits the overall compliance of such items.   If there’s any restrictions on scents and what’s allowed within the packaging, making sure that you know this early on isn’t just a good idea, it’s mandatory. But, once you know everything that you need for this, putting together scent-infused packaging is pretty easy! 

The Market Edge 

Scented packaging, especially those infused in fillers, gives you a huge market edge. When you want your brand to stand out, giving a scent associated with this, such as an unforgettable memory or the like, will really make it stand out. so is, try to consider all of these, and give yourself that added benefit when you can. 

If you’re not sure what you should use as a scent, adding a survey for customers to react and give their opinions on is really good. That way, you’re able to make it so that they’re able to improve the overall experience, and what’s to come. Another thing to do, is to look at the competitors, see how they’re unboxing, and do something differently. 

Scents are great, and are a good way to stand out. With the right scented packaging, you’re not only giving them an experience they’ll remember, but also unforgettable memories that they’ll never want to forget either. 

Fragrance-Infused Packaging to Enhance a Scented Experience 

Antoine FerraraLeave a comment

Did you know that scents play a big part in your packaging? By creating an immersive unboxing experience, many customers find a sort of excitement they might not get otherwise from the items that they buy. Here, we’ll go over how fragrance-infused packaging works, and some of the unique aspects that come with this type of packaging. 

How its Used 

The thing with fragrances is you have a few different ways to use them. 

One of the most popular is microencapsulation technology, where, with the small crystals and capsules embedded into the packaging, these smells are then released, adding another layer to your packaging. 

There’s also scratch and sniff, where you scratch the label, and then it emits a scent. You can sniff it, and many customers love this, simply because it can smell very good.

Finally, some inks are even infused with aroma. The best part is that it usually is water-based, rather than petrol-based, making them biodegradable as can be. Again, another perk of this type of packaging, that’s for sure. 

The applications 

Most luxury goods and brands will use this, because an extra scent will really do the trick, and improve the way in which your packaging works. 

Cosmetics are the same way.   That’s because adding a scent will make things even better, enhancing the overall state of your aromas. 

Food packaging is good too, because you can add the scents to the packaging as an incentive for people to purchase and consume their food. Something that they will enjoy. 

Finally, high-end retail. A lot of higher-priced items will use this type of packaging simply because it smells good, and offers some next-level support for the items at hand. 

Thee benefits 

This type of packaging works to strengthen the brand identity that’s there. 

It also improves overall customer engagement, improving the way in which customers work with your items, so that they can get the benefits from this. if you offer a unique scent, many customers will purchase this, and will in turn, offer more and more exciting opportunities for you. 

Finally, it adds an element of surprise to it, which is something most customers like. They like to feel a sort of pleasant surprise that you might not get otherwise, simply because of the presence of the material. It bolsters excitement for the items that you’re buying, and in turn, will enhance all of the unboxing experiences you wish to have. 

The future of this 

A lot of packaging is changing, and with more and more opportunities for future-proof packaging, it can make a huge difference in the long haul. 

AI-driven customer scents are one of them. This means that you allow an AI to create a scent that a customer likes and uses. This is ultimately based on the customer’s preference and purchase history, thereby giving them something to enjoy, no matter where they are. 

With so many different and innovative ways to really use scents, the sky’s the limit on what you can enjoy. Asking your customers what works best is definitely a good place to start. If you feel like you’re unable to give them what they want, consider asking what types of scents they like, and see from them. 

Adding in center and branding is a unique way to build customer excitement and engagement. With the right packaging incentives and materials, you will from there, be able to change the purchases you push forth, and get customers even more engaged with the product, in all sorts of ways, and it will be worth it for them to get the most benefits they can. 

How Magnetic Packaging is Revolutionizing Shipping 

Antoine FerraraLeave a comment

Magnetic packaging is here to stay. Magnets are powerful, especially for all sorts of supplies. Shipping closures are included. More and more packaging is using magnetic closures for a stronger seal and lock, and for better durability of the packaging. The best part? Is that it turns your packaging into something reusable, and something useful for you to implement as well. 

The Types of Magnetic Packaging 

There’s a few types of magnetic packaging worth mentioning. 

Your first, are magnetic seals that are used to create tamper-proof and easy-to-open types of designs. These are put on the edges, and you can simply pop this open. It’s good for ensuring that it’s easy to open and close.

Some magnets are also a seal, so it’s good as well for ensuring that the item is tamper proof, creating better security for the packaging as well.

The other types are put on the outside of boxes, especially for helping to create a full lock on the items. 

Why use this? Well, it is strong for starters. Some of these magnetic seals are stronger than other types of seals you might use.   There is also the benefit of removing adhesives. If you continue to use adhesives, it causes more waste for the planet. They also aren’t as strong as a magnetic seal in many cases, so there is a better security, and better packaging result if you use these, and also prevents your packaging from having any needless waste whenever possible. 

The applications 

The best applications for this are seen in electronics.   Electronics benefit a lot from magnetic packaging, since in a lot of cases, it doesn’t interfere with the technology itself. Putting this on the outside also creates a luxurious, premium feel to the packaging. It’s something beneficial for a lot of companies, since it can help make the packaging stand out.

Premium and luxury packaging thrives with this.   it looks good, is strong, and keeps the items from being tampered. A lot of customers prefer the magnetic packaging when they’re using this, since it does craft a packaging experience that really stands out.
Finally, there is modular shipping. This is where the packaging is then molded into something else. While it might seem like something useful at first, there’s a wealth of applications. Hence, more companies are thriving with this premium sort of packaging, enhancing the experience for customers of all kinds. 

The benefits and future changes 

These days, we’re seeing magnets used in a lot of outside and inside packaging. They’re strong, and high-quality magnets aren’t as expensive as you’d think they are. That means you’re giving them good protection without breaking the bank. 

It’s also easy for customers to open. Instead of fighting with scissors and wrap rage, you give them a product that’s protected, for extra consumer convenience. It means a lot for customers, and also enhances the experience. 

So what’s the future of magnetic packaging looking like? Some of them are getting smarter. Yes, smart technology is now evolving into the magnetic world, which means that they’re being used to help with tracking and showing authentication. There’s a lot of great packaging experiences that can be done with this. Many people love magnetic s, and adding more authentication technology definitely improves the overall experience, and can help with tracking and improving deliveries. 

Looking to improve your packaging? Then consider magnetics, and use them for all sorts of fun seals. It can change the packaging that you’re putting together, and really improve the accessibility, experience, and overall reusability for the packaging as well for you.